|
Product Details:
Payment & Shipping Terms:
|
| Product Name: | Resistance Steel Abrasion Plate | Place Of Origin: | China |
|---|---|---|---|
| Processing Service: | Bending, Welding, Decoiling, Cutting | Surface Treatment: | Coated |
| Standard: | ASTM, AISI, DIN Etc | Width: | 1400mm |
| Length: | 3400mm | Technique: | Hot Rolled |
| High Light: | SA1750CR chromium carbide wear plate,SA1750CR chrome carbide overlay plate,chromium carbide wear resistant plate |
||
Resistance Steel Abrasion Plate Abrasion Resistance Chromium Carbide Overlay Steel Clad Plate
| Model | Characteristics | Hardness | Chemical Composition (%) | Operating Temperature | ||||||
| (HRC) | C | Cr | Mn | Si | Mo+Nb | Ni+V+W | Fe | |||
| WD-1000 | Common chromium carbide wear plate, suited for use in general wear applications involving low to medium impact | 58-65 | 3.0-5.0 | 17.0-27.0 | 1.0-3.0 | 1.0-3.0 | / | / | Bal. | <400℃ |
| WD-1100 | ||||||||||
| WD-1200 | High chromium carbide wear plates, Cr content is high up to above 40%,suited for use in severe abrasion applications, involving low to medium impact. | 58-65 | 3.0-6.0 | 25.0-45.0 | 1.0-3.0 | 1.0-3.0 | / | / | Bal. | <400℃ |
| WD-1500 | ||||||||||
| WD-1600 | Impact resistant wear plates, Independent R&D, suitable for medium to high impact. | 58-65 | 3.5-6.5 | 25.0-45.0 | 1.0-3.0 | 1.0-3.0 | * | / | Bal. | <600℃ |
| WD-1800 | Heat resistant wear plate, heat resistance maximum up to 900℃ | 58-65 | 4.0-7.0 | 25.0-40.0 | / | / | * | * | Bal. | <900℃ |
| WD-NC100 | Crack free wear plate, mainly used as housing liner and side plate in steel mill | 50-55 | ||||||||
| Other series | Customized on request, special chemical element included for special abrasion fields | / | ||||||||
| Sheet size: 1400*3400mm 1400*3000mm 1500*3000mm 1400*3500mm 2000*3000mm 2100*3500mm Other on request | ||||||||||
| Base metal material: Q235, Q345 and so on. | ||||||||||
| Overlayer thickness: 3-50mm |
||||||||||
1. The overlay chemical composition is the key
The main ingredients of Wodon plates are C(%) :3.0-5.0 and Cr(%):25-40. This chemical proportion results in a large amount of Cr7C3 chrome carbide hard particles. The micro-hardness (up to HV1800) of these particles throughout the layer will guarantee a super wear resistant surface.
Performance test:
Test equipment: Quartz sand rubber wheel abrasion test machine.
Conditions: Choosing same dimension specimens for different materials and wear plate producers, and put them under the same wearing working conditions in our testing equipment.
45 minutes for each specimen
Results: The test results show that the life span of Wodon wear plate is 2.5 times higher than domestic wear plates and 1.5 times than imported ones.
2. Chromium carbide microstructure
The wear resistance of wear plate depends mostly on the hardness, shape, size, amount and distribution of the chromium carbide hard particles.
As you can check on the picture, the carbide (Cr7C3) volume fraction on the microstructure is above 50%.
3. Bonding strength between the overlay and base plate.
The overlay and base plate are very well bonding. The overlay will penetrate into base plate about 0.8mm-1.8mm, reaching up to 350Mpa in our tests.
ASTM G65 Wodon abrasion resistant chromium carbide overlay CCO wear plates
Cement plants, Metallurgical industry, Power plants, Coal industry, Port, Wind turbines, Mining machinery and Coal chemical industry.
Contact Person: Penny
Tel: +8618112367896
